MAX 3000 Tap Burner
With the rapid development of automation equipment, high demand of products’ precision and extensive usage of difficult-to-cut materials in machining, tools broken into work pieces has heavily affected the defective rate of products. The common methods of removing broken taps and drills are smashing items by hand, screwing them out after welding, or even acid corrosion and flame cutting, which contribute to low efficiency and damage to work pieces.
The newly innovated machine MAX-3000 is based on the technique of MAX-800 series, it can fast remove broken taps, drill, drift, screw, plug gauge, etc., without damaging to the work piece, easily process on work pieces at any size, especially effective for large machine tools. The integral construction of this machine left a space for storage at the bottom of the power box which is convenient for managing the attachments. With a high efficiency in processing, it could remove broken tap, screw and is especially good at processing mark.
Please feel free to contact us if you got any problem in processing or would like to share your valuable experience.
|Input Voltage (V)||AC110V 50/60Hz|
|Input Power (W)||3000|
|Output Voltage (V)||DC65-70V|
|Working Liquid||Tap water
(Pure water / distilled water is better. Well water should be used with caution)
|Max Travel of Working Head (mm)||70|
|Short Hole Processing Speed
Processing Material: Hardened Steel
|Machine Size (L*W*H mm)||420*220*370|
|Work Head Size (L*W*H mm)||ZK8 300*50*50|
|Pump Size（L*W*H mm）||60*45*55|